Features of the WKT-C9 Fully Automatic Volumetric Moisture Analyzer

The VicoMeter WKT-C9 fully automatic Karl Fischer moisture analyzer uses the volumetric Karl Fischer principle to rapidly determine moisture in samples, measuring moisture down to 10 ppm and determining moisture in solids, liquids, and powders within 30 seconds. The instrument has a built-in RS232 port for printers, balances, computers, and other peripherals, and can store 200 data records with real-time query! The C9 is a further upgrade of VicoMeter's "smart" volumetric Karl Fischer moisture analyzer—more automated and more precise. It complies with multiple national and international moisture measurement standards and with pharmacopoeia requirements, and is widely used in chemicals, petroleum, pharmaceuticals, electric power, food, batteries, plastics, research, and testing.

The WKT-C9 fully automatic volumetric moisture analyzer has the following main features:

1. Automatic instrument status monitoring: the analyzer self-adjusts when measuring conditions are not met, making an expert of you without extensive training.

2. Imported fully automatic solenoid three-way valve with a dead volume only 1/10 that of domestic equivalents; silent switching in 0.01 seconds.

3. The imported solenoid three-way valve solves the leakage problems of traditional valves and withstands pressures up to 100 kPa—no worry about leakage even if the lines clog. Its pressure resistance allowed higher line pressure, greatly speeding up reagent filling, draining, and replacement and safeguarding testing efficiency.

4. Large display, keypad operation, multiple shortcuts, one-touch functions, and forced step-by-step operation prompts.

5. Real-time current-change alerts with an extra-wide current display, making the trend of the entire determination clear at a glance for better sample measurement.

6. Drift measurement: harsh environments or special conditions cause measurement drift; the instrument measures the drift value and lets you decide whether to subtract it.

7. Ten configurable measurement methods, with different titration speeds, delay times, and other settings to meet the needs of any sample.

8. One-touch cleaning: startup cleaning, shutdown cleaning, standby cleaning, line cleaning, and titration cell cleaning.

9. Automatic solvent aspiration, automatic blanking, automatic reagent aspiration, automatic titration, automatic waste discharge, automatic reagent return, and automatic cleaning.

10. Customizable settings: date, operator number, sample number, burette type, measurement mode, endpoint settings, and more.

11. Fully sealed titration cell: the lid is integrally molded from corrosion-resistant PTFE, and the cell is integrally molded from high-borosilicate special glass that resists corrosion and high temperature—minimizing environmental interference and protecting the operator's health and safety.

12. Extra-large drying and filtration unit filters ambient moisture more effectively; consumables are easy to replace.

For more features, operating methods, procedures, and maintenance tips, keep following the VicoMeter moisture analyzer website: https://www.weikemeituo.com/!