VicoMeter On-site Training

• 

Customer Profile

The customer purchased our WKT-C1 Karl Fischer Moisture Analyzer. The VicoMeter WKT-C1 offers rich calculation functions: the calculation method corresponding to each analytical method is preset in the instrument, and multiple results (moisture percentage, moisture in ppm, absolute water content in the sample, and consumed Karl Fischer reagent volume) are displayed simultaneously, while a dynamic color titration curve is shown during titration. This not only lets you intuitively view more instrument parameters and analysis results, but also helps you promptly identify and determine possible side reactions so they can be suppressed.

WKT-C1 Automatic Karl Fischer Moisture Titrator

WKT-C1 Automatic Karl Fischer Moisture Titrator

The WKT-C1 "Smart" Karl Fischer moisture analyzer is a fully automatic moisture analysis system jointly developed by VicoMeter's R&D department and the 53rd Research Institute of China North Industries Group. Using the volumetric principle, it measures moisture down to 10 ppm and determines solids, liquids, and powders within 30 seconds. Its RS232 port connects printers, balances, computers, and other peripherals; it stores 100 data sets; and its separate 7-inch capacitive touchscreen runs an embedded micro Windows system — powerful, with clear operation prompts and flexible user interaction. In 2010, with help on ultra-precision displacement measurement from the State Key Laboratory of Precision Measurement Technology and Instruments at Tsinghua University, the WKT-C1 titration system was further improved, raising its measurement accuracy once again. The WKT-C1 complies with multiple national and international moisture standards and with pharmacopoeia requirements and is widely used in chemicals, petroleum, pharmaceuticals, power, food, batteries, plastics, research, and testing.

VicoMeter at the Customer Site

After receiving the instrument shipped by VicoMeter, the customer had already taken it out and performed a simple installation. Therefore, upon arrival, the VicoMeter technical engineer did not re-check the accessories with the customer and instead made minor corrections to the less-than-perfect aspects of the installation. The engineer swapped the customer's reagent bottle and solvent bottle — because the reagent is light-sensitive, the reagent bottle must be amber. The engineer also made a simple size adjustment to the rubber stopper on the waste bottle and installed a reagent rack for the customer. After these simple installation adjustments, the engineer tested the customer's sample. The sample was first dissolved in methanol and found to dissolve well, so the engineer proceeded directly with testing. Thanks to the sample's good solubility, the test results were very stable and basically consistent with the results the customer had previously obtained from a third party. The customer was very satisfied with the VicoMeter instrument.

Customer Profile

Linyi Huanshi Pellet Equipment

(Click image to enlarge)

Linyi Huanshi Pellet Equipment

Linyi Huanshi Pellet Equipment Co., Ltd. is an advanced equipment R&D enterprise supervised by the Shandong High-Tech Development Zone and founded with investment from returned overseas Chinese Mr. Wang Zhenfu. Located in the Linyi Overseas Students Pioneer Park in Shandong, the company mainly engages in the R&D and sales of pellet equipment, continuously absorbing advanced foreign technologies while adapting to domestic conditions to develop pharmaceutical equipment at an advanced domestic level, in strict accordance with GMP requirements and the standards of the pharmaceutical machinery industry association.